How Much Does a Concrete Driveway Cost in DFW?

How Much Does a Concrete Driveway Cost in DFW?

If you're pricing out a new driveway in the Dallas–Fort Worth area, the number you keep seeing online might not tell the whole story. Costs vary more than most homeowners expect and in North Texas, a few local factors push prices in directions that national averages don't capture. Here's what you actually need to know before you call a contractor.

DFW Concrete Driveway

What Concrete Driveways Cost in DFW

For a standard poured concrete driveway in the DFW metro, you can expect to pay $4 to $8 per square foot installed. A two-car driveway typically runs 400–600 square feet, which puts most jobs in the $1,600–$4,800 range depending on thickness, site conditions, and finish. If you want exposed aggregate — a decorative finish with visible stone texture that holds up well in Texas heat and looks sharp for decades — budget $8 to $15 per square foot or more. The material costs more, the finish takes more time, and the result is worth it for homeowners who want the upgrade.

What Affects the Final Price

Size and thickness

Driveway slabs are typically poured at 4 inches for standard passenger vehicles. If you park heavy trucks or equipment, 6 inches is the right call. More material and more labor add to the cost — but under-building a slab costs more when it cracks prematurely.

Removal of the old driveway

Most DFW homeowners replacing an existing driveway underestimate demolition costs. Breaking up and hauling away old concrete adds real time and equipment to any job. Expect this to be a line item in your quote.

Texas soil conditions

DFW sits on some of the most reactive clay soil in the country. That clay expands when wet and contracts when dry — and it moves concrete with it if a slab isn't properly prepared. A good contractor accounts for this in the subbase. Cutting corners on prep is exactly how driveways crack within a couple of years.

Heat and pour timing

Concrete poured in extreme heat can cure too fast, weakening the slab. In a Texas summer, experienced crews work early mornings, use additives, and wet-cure the slab properly. You want a contractor who has poured thousands of yards in DFW summers, not one who skips the steps that protect the work.

Rebar and reinforcement

Wire mesh is the minimum. Rebar is better, especially if you have heavy vehicles or soft spots in your soil. Ask your contractor what reinforcement they spec — it's a detail that separates a slab that lasts 30 years from one that doesn't.

Standard vs. Exposed Aggregate: Which Is Right for You?

Standard concrete holds up well, looks clean, and is the most economical choice. It can be broom-finished for traction and sealed to extend its life.

Exposed aggregate gives you a textured, stone-speckled surface that hides tire marks, resists staining, and adds curb appeal. In DFW's climate, the texture also provides better grip during the occasional icy morning. The higher upfront cost is offset by lower maintenance and a finish that doesn't look tired after a few years.

What You Won't Find on Any Price List

The real cost difference between quotes usually isn't material — it's what each contractor puts under the slab. Base prep, reinforcement, expansion joints, and proper curing are what separate a driveway that lasts decades from one that cracks in a few Texas summers.

At Midtex Services, we've been pouring driveways in DFW for over 30 years. We know what the soil demands and what the heat does to a pour. Every quote we give reflects that experience, not just a square footage rate.

Call Midtex Services at 972.880.9459 or request a free quote online. We'll measure your driveway, walk you through your options, and give you a straight number — no surprises.